低粘度 結晶 PA6 德國巴斯夫 8202C 抗化學性 成型快 齒輪 閥門部件 家具Ultramid? 8202CPolyamide 6BASF Corporation產品說明：Ultramid 8202C is a modified crystalline and low viscosity, PA6 injection molding homopolymer. It is also available in heat stabilized (Ultramid 8202C HS) and/or pigmented versions. Its unique crystalline structure results in increased strength, stiffness, heat distortion temperature and performance under load as a homopolymer. It also cycles faster while maintaining properties and chemical resistance.ApplicationsUltramid 8202C is ideally suited for applications such as: furniture casters, gears, window hardware, and fittings, insulators, bushings, valves, relays, wiring devices, and other electrical components.物性信息：基本信息黃卡編號E36632-231112特性低粘度結晶均聚物可加工性，良好快的成型周期耐化學性良好用途襯套齒輪電氣/電子應用領域電氣元件閥門/閥門部件家具配件機構評級EC 1907/2006 (REACH)RoHS 合規性RoHS 合規外觀可用顏色形式粒子加工方法注射成型多點數據Isothermal Stress vs. Strain (ISO 11403-1)Secant Modulus vs. Strain (ISO 11403-1)Viscosity vs. Shear Rate (ISO 11403-2)物理性能干燥調節后的單位制測試方法比重1.13--g/cm3ASTM D792, ISO 1183收縮率 - 流動 (3.18 mm)0.90--%吸水率     24 hr1.6--%ASTM D570     23°C, 24 hr1.6--%ISO 62     飽和9.3--%ASTM D570     飽和, 23°C9.3--%ISO 62     平衡, 50% RH2.6--%ASTM D570     平衡, 23°C, 50% RH2.6--%ISO 62硬度干燥調節后的單位制測試方法洛氏硬度 (R 級)120--ASTM D785電氣性能干燥調節后的單位制測試方法體積電阻率     1.50 mm> 1.0E+13--ohms·cmASTM D257     --> 1.0E+13--ohms·cmIEC 60093介電強度 1(1.50 mm)30--kV/mmASTM D149漏電起痕指數600--VIEC 60112可燃性干燥調節后的單位制測試方法UL 阻燃等級UL 94     0.71 mmV-2--UL 94     1.5 mmV-2--UL 94     3.0 mmV-2--UL 94     6.0 mmV-2--UL 94低粘度 結晶 PA6 德國巴斯夫 8202C 抗化學性 成型快 齒輪 閥門部件 家具